View ATF1500A_5595029.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 tqfp top view 1 2 3 4 5 6 7 8 9 10 11 33 32 31 30 29 28 27 26 25 24 23 i/o i/o i/o gnd i/o i/o i/o i/o vcc i/o i/o i/o i/o i/o i/o vcc i/o i/o i/o i/o gnd i/o 44 43 42 41 40 39 38 37 36 35 34 12 13 14 15 16 17 18 19 20 21 22 i/o i/o i/o i/o gnd vcc i/o i/o i/o i/o i/o i/o i/o i/o/pd vcc oe2/i gclr/i oe1/i clk/i gnd i/o i/o plcc to p v i e w 7 8 9 10 11 12 13 14 15 16 17 39 38 37 36 35 34 33 32 31 30 29 i/o i/o i/o gnd i/o i/o i/o i/o vcc i/o i/o i/o i/o i/o i/o vcc i/o i/o i/o i/o gnd i/o 6 5 4 3 2 1 44 43 42 41 40 18 19 20 21 22 23 24 25 26 27 28 i/o i/o i/o i/o gnd vcc i/o i/o i/o i/o i/o i/o i/o i/o/pd vcc oe2/i gclr/i oe1/i clk/i gnd i/o i/o pin configurations pin name function clk clock i logic inputs i/o bidirectional buffers gclr register reset (active low) oe1, oe2 output enable (active low) vcc +5v supply pd power down (active high) features ? high-density, high-performance electrically-erasable complex programmable logic device C 44-pin, 32 i/o cpld C 7.5 ns maximum pin-to-pin delay C registered operation up to 125 mhz C fully connected input and feedback logic array C backward compatibility with atf1500/l software and hardware ? flexible logic macrocell C d/t/latch configurable flip flops C global and individual register control signals C global and individual output enable C programmable output slew rate ? advanced power management features C automatic 3 ma stand-by (ATF1500Al) C pin-controlled 10 ma standby mode C programmable pin-keeper inputs and i/os ? available in commercial and industrial temperature ranges ? available in 44-pin plcc and tqfp packages ? advanced flash technology C 100% tested C completely reprogrammable C 100 program/erase cycles C 20 year data retention C 2000v esd protection C 200 ma latch-up immunity ? supported by popular 3rd party tools ? security fuse feature ? pin-compatible with the most commonly used devices description the ATF1500A is a high-performance, high-density complex pld. built on an advanced flash technology, it has maximum pin to pin delays of 7.5 ns and supports sequential logic operation at speeds up to 125 mhz. with 32 logic macrocells and up to 36 inputs, it easily integrates logic from several ttl, ssi, msi and classic plds. the ATF1500As global input and feedback architecture simplifies logic placement and eliminates pinout changes due to design changes. high- performance epld ATF1500A ATF1500Al rev. 0759eC06/99 (continued)
ATF1500A(l) 2 functional logic diagram (1) note: 1. arrows connecting macrocells indicate direction and groupings of casin/casout data flow. the ATF1500A has 32 bi-directional i/o pins and 4 dedi- cated input pins. each dedicated input pin can also serve as a global control signal: register clock, register reset or output enable. each of these control signals can be selected for use individually within each macrocell. each of the 32 logic macrocells generates a buried feed- back, which goes to the global bus. each input and i/o pin also feeds into the global bus. because of this global bus- sing, each of these signals is always available to all 32 macrocells in the device.
ATF1500A(l) 3 each macrocell also generates a foldback logic term, which goes to a regional bus. all signals within a regional bus are connected to all 16 macrocells within the region. cascade logic between macrocells in the ATF1500A allows fast, efficient generation of complex logic functions. the ATF1500A contains 4 such logic chains, each capable of creating sum term logic with a fan in of up to 40 product terms. bus friendly pin-keeper input and i/os all input and i/o pins on the ATF1500A have programma- ble pin keeper circuits. if activated, when any pin is driven high or low and then subsequently left floating, it will stay at that previous high or low level. this circuitry prevents unused input and i/o lines from floating to intermediate voltage levels, which cause unnec- essary power consumption and system noise. the keeper circuits eliminate the need for external pull-up resistors and eliminate their dc power consumption. pin-keeper circuits can be disabled. programming is con- trolled in the logic design file. once the pin-keeper circuits are disabled, normal termination procedures are required for unused inputs and i/os. speed/power management the ATF1500A has several built-in speed and power man- agement features. the ATF1500A contains circuitry that automatically puts the device into a low power stand-by mode when no logic transitions are occurring. this not only reduces power consumption during inactive periods, but also provides a proportional power savings for most appli- cations running at system speeds below 10 mhz. all ATF1500As also have an optional pin-controlled power down mode. in this mode, current drops to below 10 ma. when the power down option is selected, the pd pin is used to power down the part. the power down option is selected in the design source file. when enabled, the device goes into power down when the pd pin is high. in the power down mode, all internal logic signals are latched and held, as are any enabled outputs. all pin transitions are ignored until the pd is brought low. when the power down feature is enabled, the pd cannot be used as a logic input or output. however, the pd pin's macrocell may still be used to generate buried foldback and cascade logic sig- nals. each output also has individual slew rate control. this may be used to reduce system noise by slowing down outputs that do not need to operate at maximum speed. outputs default to slow switching, and may be specified as fast switching in the design file. design software support ATF1500A designs are supported by several 3rd party tools. automated fitters allow logic synthesis using a variety of high level description languages and formats. input diagram i/o diagram 100k v cc esd protection circuit input programmable option 100k v cc v cc data oe i/o programmable option
ATF1500A(l) 4 ATF1500A(l) macrocell ATF1500A macrocell the ATF1500A macrocell is flexible enough to support highly complex logic functions operating at high speed. the macrocell consists of five sections: product terms and prod- uct term select multiplexer; or/xor/cascade logic; a flip flop; output select and enable; and logic array inputs. product terms and select mux each ATF1500A macrocell has five product terms. each product term receives as its inputs all signals from both the global bus and regional bus. the product term select multiplexer (ptmux) allocates the five product terms as needed to the macrocell logic gates and control signals. the ptmux programming is deter- mined by the design compiler, which selects the optimum macrocell configuration. or/xor/cascade logic the ATF1500A macrocells or/xor/cascade logic structure is designed to efficiently support all types of logic. within a single macrocell, all the product terms can be routed to the or gate, creating a five input and/or sum term. with the addition of the casin from neighboring macrocells, this can be expanded to as many as 40 product terms with a very small additional delay. the macrocells xor gate allows efficient implementation of compare and arithmetic functions. one input to the xor comes from the or sum term. the other xor input can be a product term or a fixed high or low level. for combinato- rial outputs, the fixed level input allows output polarity selection. for registered functions, the fixed levels allow de morgan minimization of the product terms. the xor gate is also used to emulate t-type flip flops. flip flop the ATF1500As flip flop has very flexible data and control functions. the data input can come from either the xor gate or from a separate product term. selecting the sepa- rate product term allows creation of a buried registered feedback within a combinatorial output macrocell.
ATF1500A(l) 5 in addition to d, t, jk and sr operation, the flip flop can also be configured as a flow-through latch. in this mode, data passes through when the clock is high and is latched when the clock is low. the clock itself can be either the global clk pin or an indi- vidual product term. the flip flop changes state on the clock's rising edge. when the clk pin is used as the clock, one of the macrocell product terms can be selected as a clock enable. when the clock enable function is active and the enable signal (product term) is low, all clock edges are ignored. the flip flop's asynchronous reset signal (ar) can be either the pin global clear (gclr), a product term, or always off. ar can also be a logic or of gclr with a product term. the asynchronous preset (ap) can be a product term or always off. output select and enable the ATF1500A macrocell output can be selected as regis- tered or combinatorial. when the output is registered, the same registered signal is fed back internally to the global bus. when the output is combinatorial, the buried feedback can be either the same combinatorial signal or it can be the register output if the separate product term is chosen as the flip flop input. the output enable multiplexer (moe) controls the output enable signals. any buffer can be permanently enabled for simple output operation. buffers can also be permanently disabled to allow use of the pin as an input. in this configu- ration all the macrocell resources are still available, includ- ing the buried feedback, expander and cascade logic. the output enable for each macrocell can also be selected as either of the two oe pins or as an individual product term. global/regional busses the global bus contains all input and i/o pin signals as well as the buried feedback signal from all 32 macrocells. together with the complement of each signal, this provides a 68 bit bus as input to every product term. having the entire global bus available to each macrocell eliminates any potential routing problems. with this architecture designs can be modified without requiring pinout changes. each macrocell also generates a foldback product term. this signal goes to the regional bus, and is available to 16 macrocells. the foldback is an inverse polarity of one of the macrocell's product terms. the 16 foldback terms in each region allow generation of high fan-in sum terms (up to 21 product terms) with a small additional delay.
ATF1500A(l) 6 note: 1. all i cc parameters measured with outputs open, and a 16-bit loadable, up/down counter programmed into each region. absolute maximum ratings* temperature under bias.................................. -40c to +85c *notice: stresses beyond those listed under absolute maximum ratings may cause permanent dam- age to the device. this is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. note: 1. minimum voltage is -0.6v dc, which may under- shoot to -2.0v for pulses of less than 20 ns. max- imum output pin voltage is v cc + 0.75v dc, which may overshoot to 5.25v for pulses of less than 20 ns. storage temperature ..................................... -65c to +150c voltage on any pin with respect to ground .........................................-2.0v to +7.0v (1) voltage on input pins with respect to ground during programming.....................................-2.0v to +14.0v (1) programming voltage with respect to ground .......................................-2.0v to +14.0v (1) dc and ac operating conditions commercial industrial operating temperature (ambient) 0 c - 70 c-40 c - 85 c v cc power supply 5v 5% 5v 10% dc characteristics symbol parameter condition min typ max units i il input or i/o low leakage current 0 v in v il (max) -10 m a i ih input or i/o high leakage current v ih , min v in v cc 10 m a i cc1 (1) power supply current, standby v cc = max, v in = 0, v cc ATF1500A com. 70 ma ind. 100 ma ATF1500Al com. 3 ma ind. 5 ma i cc2 power supply current, pin-controlled power down mode v cc = max, v in = 0, v cc 210ma i os output short circuit current v out = 0.5v -130 ma v il input low voltage v cc , min < v cc < v cc , max -0.5 0.8 v v ih input high voltage 2.0 v cc + 1 v v ol output low voltage v cc = min i ol = 12 ma 0.45 v v oh output high voltage v cc = min i oh = -4 ma 2.4 v i oh = -0.2 ma v cc - 0.2 v
ATF1500A(l) 7 ac waveforms note: 1. for slow slew outputs, add t sso . register ac characteristics, input pin clock symbol parameter -7 -10 -12 -15 -20 -25 units min max min max min max min max min max min max t cos (1) clock to output 4.52526282929ns t cfs clock to feedback 2 2 2 2 2 2 ns t sis i, i/o setup time 6 8 10 11 14 16 ns t sfs feedback setup time 6 8 10 11 12 13 ns t hs input, i/o, feedback hold time 0 00000ns t ps clock period 6 8 9 10 11 12 ns t ws clock width3 44.555.56 ns f maxs external feedback 1/(t sis + t cos ) 95 76.9 62.5 52.6 43 40 mhz internal feedback 1/(t sfs + t cfs ) 125 100 83.3 76.9 71 66 mhz no feedback 1/(t ps ) 166.7 125 111 100 91 83 mhz t rprs reset pin recovery time 2 33455ns t rtrs reset term recovery time 6 9 10 12 13 14 ns
ATF1500A(l) 8 note: 1. for slow slew outputs, add t sso . register ac characteristics, product term clock symbol parameter -7 -10 -12 -15 -20 -25 units min max min max min max min max min max min max t coa (1) clock to output 7.5 10 12 15 18 20 ns t cfa clock to feedback 5 7 7 9 12 15 ns t sia i, i/o setup time 3 3 4 4 8 10 ns t sfa feedback setup time 3 3 4 4 12 15 ns t ha input, i/o, feedback hold time 2 34455ns t pa clock period 6 8 10 12 24 30 ns t wa clock width 3 4 5 6 12 15 ns f maxa external feedback 1/(t sia + t coa ) 95.2 76.9 62.5 52.6 38 33.3 mhz internal feedback 1/(t sfa + t cfa ) 125 100 90.9 76.9 41.7 33.3 mhz no feedback 1/(t pa ) 166.7 125 100 83.3 41.7 33.3 mhz t rpra reset pin recovery time 0000 00ns t rtra reset term recovery time 4566 78ns
ATF1500A(l) 9 note: 1. for slow slew outputs, add t sso . ac characteristics symbol parameter -7 -10 -12 -15 -20 -25 units min max min max min max min max min max min max t pd (1) i, i/o or fb to non-registered output 27.5310312315320325 ns t pd2 i, i/o to feedback 5 7 8 9 12 14 ns t pd3 (1) feedback to non-registered output 27.5310312315320325 ns t pd4 feedback to feedback 5 7 8 9 12 14 ns t ea (1) oe term to output enable 27.5310312315320325 ns t er oe term to output disable 27.5210212215220225 ns t pzx (1) oe pin to output enable 25.52 7 2 8 2 9 210211 ns t pxz oe pin to output disable 1.5 5.5 1..5 7 1.5 8 1.5 9 1.5 10 1.5 11 ns t pf preset to feedback 6 9 9 12 18 20 ns t po (1) preset to registered output 8.51214202325ns t rpf reset pin to feedback 34355.56ns t rpo (1) reset pin to registered output 5.5 7 8 11 13 15 ns t rtf reset term to feedback 6 9 9 121520ns t rto (1) reset term to registered output 8.51214202325ns t cas cascade logic delay 0.8 0.8 1 1 1.5 1.5 ns t sso slow slew output adder 3 33444ns t fld foldback term delay 4 5 7 8 10 12 ns
ATF1500A(l) 10 notes: 1. for slow slew outputs, add t sso . 2. pin or product term. input test waveforms and measurement levels output test load note: 1. typical values for nominal supply voltage. this parameter is only sampled and is not 100% tested. power down ac characteristics symbol parameter -7 -10 -12 -15 -20 -25 units minmaxminmaxminmaxminmaxminmaxminmax t ivdh valid i, i/o before pd high 7 1012152025 ns t gvdh valid oe (2) before pd high 7 1012152025 ns t cvdh valid clock (2) before pd high 7 1012152025 ns t dhix input don't care after pd high 15 20 22 25 30 35 ns t dhgx oe don't care after pd high 15 20 22 25 30 35 ns t dhcx clock don't care after pd high 15 20 22 25 30 35 ns t dliv pd low to valid i, i/o 111111 m s t dlgv pd low to valid oe (2) 111111 m s t dlcv pd low to valid clock (2) 111111 m s t dlov (1) pd low to valid output 111111 m s 3.0v 0.0v 1.5v ac driving levels ac measurement level t r , t f 1.5 ns pin capacitance f = 1 mhz, t = 25c (1) typ max units conditions c in 4.5 5.5 pf v in = 0v c out 3.5 4.5 pf v out = 0v
ATF1500A(l) 11 power up reset the ATF1500As registers are designed to reset during power up. at a point delayed slightly from v cc crossing v rst , all registers will be reset to the low state. as a result, the registered output state will always be low on power-up. this feature is critical for state machine initialization. how- ever, due to the asynchronous nature of reset and the uncertainty of how v cc actually rises in the system, the fol- lowing conditions are required: 1. the v cc rise must be monotonic, from below 0.7 volt, 2. after reset occurs, all input and feedback setup times must be met before driving the clock signal high, and 3. signals from which clocks are derived must remain sta- ble during t pr . power down mode the ATF1500A includes an optional pin controlled power down feature. when this mode is enabled, the pd pin acts as the power down pin. when the pd pin is high, the device supply current is reduced to less than 10 ma. during power down, all output data and internal logic states are latched and held. therefore, all registered and combinatorial output data remain valid. any outputs which were in a hi-z state at the onset of power down will remain at hi-z. during power down, all input signals except the power down pin are blocked. input and i/o hold latches remain active to insure that pins do not float to indeterminate levels, further reduc- ing system power. the power down pin feature is enabled in the logic design file. designs using the power down pin may not use the pd pin logic array input. however, all other pd pin macrocell resources may still be used, including the buried feedback and foldback product term array inputs. register preload the ATF1500As registers are provided with circuitry to allow loading of each register with either a high or a low. this feature will simplify testing since any state can be forced into the registers to control test sequencing. a jedec file with preload is generated when a source file with preload vectors is compiled. once downloaded, the jedec file preload sequence will be done automatically when vectors are run by any approved programmers. the preload mode is enabled by raising an input pin to a high voltage level. contact atmel pld applications for pre- load pin assignments, timing and voltage requirements. output slew rate control each ATF1500A macrocell contains a configuration bit for each i/o to control its output slew rate. this allows selected data paths to operate at maximum throughput while reduc- ing system noise from outputs that are not speed-critical. outputs default to slow edges, and may be individually set to fast in the design file. output transition times for outputs configured as slow have a t sso delay adder. security fuse usage a single fuse is provided to prevent unauthorized copying of the ATF1500A fuse patterns. once programmed, fuse verify and preload are prohibited. however, the 160-bit user signature remains accessible. the security fuse should be programmed last, as its effect is immediate. parameter description typ max units t pr power-up reset time 210 m s v rst power-up reset voltage 3.8 4.5 v
ATF1500A(l) 12 normalized supply current vs. input frequency ATF1500A (v cc = 5v, ta = 25?c) i cc normalized supply current vs. supply voltage atf1500 (ta = 25?c) i cc i oh output source current vs. supply voltage (v oh = 2.4v, ta = 25?c) i oh ma output source current vs. output voltage (v oh = 2.4v, ta = 25?c) supply current vs. frequency ATF1500Al (v cc = 5v, ta = 25?c) i cc ma normalized supply current vs. ambient temperature atf1500 (v cc = 5v) i cc ma output sink surrent vs. supply voltage (ta = 25?c, v ol = 0.45v) i ol ma output source current vs. output voltage (v cc = 5v, ta = 25?c) i oh ma
ATF1500A(l) 13 output sink current vs. output voltage (v cc = 5v, ta = 25?c) i ol ma input clamp current vs. input voltage input current vs. input voltage (v cc = 5v, ta = 25?c) normalized t cos vs. supply voltage (ta = 25?c) t cos t pd normalized t pd vs. ambient temperature (v cc = 5v) t cos normalized t cos vs. ambient temperature (v cc = 5v) t coa normalized t coa vs. ambient temperature (v cc = 5v)
ATF1500A(l) 14 t sis normalized t sis vs. supply voltage (ta = 25?c) t sia normalized t sia vs. supply voltage (ta = 25?c) t sis normalized t sis vs. ambient temperature (v cc = 5v) t sia normalized t sia vs. ambient temperature (v cc = 5v)
ATF1500A(l) 15 using c product for industrial to use commercial product for industrial temperature ranges, down-grade one speed grade from the i to the c device (7 ns c = 10 ns i) and de-rate power by 30%. ordering information t pd (ns) t cos (ns) f max (mhz) ordering code package operation range 7.5 4.5 95 ATF1500A-7ac ATF1500A-7jc 44a 44j commercial (0 c to 70 c) 10 5 76.9 ATF1500A-10ac ATF1500A-10jc 44a 44j commercial (0 c to 70 c) ATF1500A-10ai ATF1500A-10ji 44a 44j industrial (-40 c to 85 c) 12 6 62.5 ATF1500A-12ac ATF1500A-12jc 44a 44j commercial (0 c to 70 c) ATF1500A-12ai ATF1500A-12ji 44a 44j industrial (-40 c to 85 c) 15 8 52.6 ATF1500A-15ac ATF1500A-15jc 44a 44j commercial (0 c to 70 c) ATF1500A-15ai ATF1500A-15ji 44a 44j industrial (-40 c to 85 c) 20 9 40 ATF1500Al-20ac ATF1500Al-20jc 44a 44j commercial (0 c to 70 c) ATF1500Al-20ai ATF1500Al-20ji 44a 44j industrial (-40 c to 85 c) 25 9 43 ATF1500Al-25ac ATF1500Al-25jc 44a 44j commercial (0 c to 70 c) ATF1500Al-25ai ATF1500Al-25ji 44a 44j industrial (-40 c to 85 c) package type 44a 44-lead, thin plastic gull wing quad flatpack (tqfp) 44j 44-lead, plastic j-leaded chip carrier (plcc)
ATF1500A(l) 16 packaging information *controlling dimension: millimeters 1.20(0.047) max 10.10(0.394) 9.90(0.386) sq 12.21(0.478) 11.75(0.458) sq 0.75(0.030) 0.45(0.018) 0.15(0.006) 0.05(0.002) 0.20(.008) 0.09(.003) 0 7 0.80(0.031) bsc pin 1 id 0.45(0.018) 0.30(0.012) .045(1.14) x 45 pin no. 1 identify .045(1.14) x 30 - 45 .012(.305) .008(.203) .021(.533) .013(.330) .630(16.0) .590(15.0) .043(1.09) .020(.508) .120(3.05) .090(2.29) .180(4.57) .165(4.19) .500(12.7) ref sq .032(.813) .026(.660) .050(1.27) typ .022(.559) x 45 max (3x) .656(16.7) .650(16.5) .695(17.7) .685(17.4) sq sq 44a , 44-lead, thin (1.0 mm) plastic gull wing quad flat package (tqfp) dimensions in millimeters and (inches)* 44j , 44-lead, plastic j-leaded chip carrier (plcc) dimensions in inches and (millimeters)
? atmel corporation 1999. atmel corporation makes no warranty for the use of its products, other than those expressly contained in the companys standard war- ranty which is detailed in atmels terms and conditions located on the companys web site. the company assumes no responsibilit y for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any tim e without notice, and does not make any commitment to update the information contained herein. no licenses to patents or other intellectu al prop- erty of atmel are granted by the company in connection with the sale of atmel products, expressly or by implication. atmels pr oducts are not authorized for use as critical components in life support devices or systems. atmel headquarters atmel operations corporate headquarters 2325 orchard parkway san jose, ca 95131 tel (408) 441-0311 fax (408) 487-2600 europe atmel u.k., ltd. coliseum business centre riverside way camberley, surrey gu15 3yl england tel (44) 1276-686-677 fax (44) 1276-686-697 asia atmel asia, ltd. room 1219 chinachem golden plaza 77 mody road tsimhatsui east kowloon hong kong tel (852) 2721-9778 fax (852) 2722-1369 japan atmel japan k.k. 9f, tonetsu shinkawa bldg. 1-24-8 shinkawa chuo-ku, tokyo 104-0033 japan tel (81) 3-3523-3551 fax (81) 3-3523-7581 atmel colorado springs 1150 e. cheyenne mtn. blvd. colorado springs, co 80906 tel (719) 576-3300 fax (719) 540-1759 atmel rousset zone industrielle 13106 rousset cedex france tel (33) 4-4253-6000 fax (33) 4-4253-6001 fax-on-demand north america: 1-(800) 292-8635 international: 1-(408) 441-0732 e-mail literature@atmel.com web site http://www.atmel.com bbs 1-(408) 436-4309 printed on recycled paper. 0759eC06/99/xm marks bearing ? and/or ? are registered trademarks and trademarks of atmel corporation. terms and product names in this document may be trademarks of others.

▲Up To Search▲

Price & Availability of ATF1500A

	To Download ATF1500A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .